[ICOM] IC 735 CW Power Output

[Jim Vohland]

Just a thought to keep me straight. I thought he said he had full output on ssb but not on cw. If the meter was in the wrong position, wouldn't it have only shown partial deflection of ssb. 
 
> Date: Thu, 12 Aug 2010 12:21:18 -0700
> From: n4ydu at yahoo.com
> To: icom at mailman.qth.net
> Subject: Re: [ICOM] IC 735 CW Power Output
> 
> Thanks Jim - I'll check it out when I get home today.
>  
> 73,
>  
> Nate/N4YDU
> 
> --- On Thu, 8/12/10, Jim Hargrave <w5ifp at gvtc.com> wrote:
> 
> 
> From: Jim Hargrave <w5ifp at gvtc.com>
> Subject: Re: [ICOM] IC 735 CW Power Output
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Date: Thursday, August 12, 2010, 2:01 PM
> 
> 
> Nate,
> 
> Check your "Meter" switch. If it is in "ALC" position it will show about 1/2
> power which is at the top of the ALC scale.
> Make sure the switch is in the "PO" position (not depressed).
> If the switch is depressed it will be in the ALC position.
> Also make sure the SWR switch in the back of the radio is in the "PO"
> position.
> 
> Enjoy the nice radio. I have had mine for 22 years and its still going
> strong. Mine has only been opened twice. Once to change the battery and the
> other time to change the CI-V baud rate to 9600.
> 
>      73's Jim
>       W5IFP
> 
> 
> 
> > -----Original Message-----
> > From: icom-bounces at mailman.qth.net
> > [mailto:icom-bounces at mailman.qth.net]On Behalf Of Nathan Moreschi
> > Sent: Thursday, August 12, 2010 6:13 AM
> > To: ICOM Reflector
> > Subject: Re: [ICOM] IC 735 CW Power Output
> >
> >
> > Thanks, but I highly doubt the filter has changed the
> > output...the output is
> > the same with the filter on or off.
> >
> > 73,
> >
> > Nate/N4YDU
> > ----- Original Message -----
> > From: "GGLL" <nagato at arnet.com.ar>
> > To: "ICOM Reflector" <icom at mailman.qth.net>
> > Sent: Thursday, August 12, 2010 12:07 AM
> > Subject: Re: [ICOM] IC 735 CW Power Output
> >
> >
> > Maybe a carrier adjustment is in order; with the new, narrower filter,
> > the carrier position could be slightly off the passband.
> >
> > Regards
> > Guillermo - LU8EYW.
> >
> > El 11/08/2010 23:56, Nathan Moreschi escribió:
> > > Guys,
> > >
> > > I received an IC 735 the other day and I am having fun with it. I
> > > managed to install and INRAD #111 400hz filter tonight without any
> > > problems.
> > >
> > > I detected a problem however when operating in CW. The power out is
> > > just 50 watts rather than 100. I get more than 100 watts out on SSB
> > > and FM. This is indeed strange to me...any thoughts???
> > >
> > > 73,
> > >
> > > Nate/N4YDU ---- Your Moderator: Dick Flanagan K7VC:
> > > icom-owner at mailman.qth.net Icom Users Net: Sundays, 1700Z, 14.316
> > > MHz Icom FAQ: http://www.qsl.net/icom/ To support QSL/QTH.net:
> > > http://www.qsl.net/donate.html
> > >
> > >
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 9.0.851 / Virus Database: 271.1.1/3065 - Release Date:
> > 08/11/10 13:34:00
> >
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html