[ICOM] IC 211 - where's the FM modulator to install a tone board

[ma.locksmith at juno.com]

Remove the top cover.  Have set front panel facing away from you.

On left hand side, maybe an inch from the left edge, an inch and a half
from the front edge of the board is R59....  FM deviation.

Ed
K1ZOK
 
On Fri, 20 Nov 2009 15:49:32 -0500 "Greg Mijal"
<bluebirdtele at embarqmail.com> writes:
> Hi:
> 
> I would like to add a tone encoder to my IC 211 2m all mode but 
> cannot locate the FM modulator.  The manual(less schematic) calls 
> out Q11 as the modulator it self but I should be looking for the 
> wiper of the transmit discriminator in order to wire in the 
> subaudible tones.
> Any whiz kids on the IC 211 out there?
> Thanks!
> Greg
> WA7LYO
> Kinston NC
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
> 
 
____________________________________________________________
Online Psychology Degrees
Earn your psychology degree online. Earn your BS, MA, MBA, Ph.D now.
http://thirdpartyoffers.juno.com/TGL2141/c?cp=iJicpKdNwcVGorDRiKtR5AAAJ1D7cSlMk8z5yUt2kS6f112HAAQAAAAFAAAAAIGVoz4AAAMlAAAAAAAAAAAAAAAAAAWSEwAAAAA=