[ICOM] IC-207 problems

[Larry Winslow]

Hi Gary

I have the manual in a pdf file if that's what you're offering to send 
to me. If you have something more, yes I can accept large emails and 
would appreciating it.

73 - Larry WØNFU
Lake Forest Park, WA
larry_w at comcast.net


Gary Fiber wrote:
> Larry,
>
> Not sure the entire link will work since you have 
> to agree to a question  but some will get you to 
> the Icom Japan web site. there choose Global in 
> the upper right cornet, then support then manual 
> downloads. The IC-207 manual is some 5 megs in 
> size. http://www.icom.co.jp/world/support/download/manual/pdf/IC-207H.pdf
> Or I'll save it on my computer and I could email 
> it to you if you can accept such large emails.
>
> Icom America's web page no longer has the IC-207 
> on it. On the 207 manual page 46 it talks about 
> programming a DTMF code, there is a "d" in the 
> left side of the display. Press and hold DTMF for 
> about 1 second to get into that mode. Press "SET" 
> to enter programming mode and turn the tuning 
> dial to the desired digit. In your case turn it 
> to the dash "-" for all digits then press the tuning dial to exit that mode.
> The partial reset will not get rid of DTMF memory 
> channels., the full reset press "SET" and "S. MW" 
> while turn on the power. This may also restart 
> the demo mode to exit that press "BAND" while pressing PWR.
>
> Gary K8IZ
>
>
>
>
> At 10:52 PM 12/6/2009, you wrote:
>   
>> Thanks to all for the suggestions. I was tempted to do a master reset
>> but will other actions first.
>>
>> Now I've got to find my manual which might be difficult as we move a
>> couple of months ago & I don't have everything unpacked!!!!
>>
>> Again, thanks
>> 73 - Larry WØNFU
>> Lake Forest Park, WA
>> larry_w at comcast.net
>>
>>
>> Edward L. Dowdy wrote:
>>     
>>> Sounds like its set for tone squelch. Won't 
>>>       
>> hear a peep without the correct
>>     
>>> tone on the signal.
>>>
>>> Ed
>>>
>>> ----- Original Message -----
>>> From: "Mike Olbrisch" <mike-2007 at elp.rr.com>
>>> To: "'ICOM Reflector'" <icom at mailman.qth.net>
>>> Sent: Sunday, December 06, 2009 8:22 AM
>>> Subject: Re: [ICOM] IC-207 problems
>>>
>>>
>>>
>>> Hmmm - not having a 207 - I can only guess.  BUT - before you send it off
>>> for
>>> repairs, try a master reset.  Yes - you will need to reprogram it.  You
>>> would
>>> probably need to do that when it returns anyway.  However, if it works, no
>>> need
>>> to send it off.
>>>
>>> Good luck.
>>>
>>> Mike - KD9KC.
>>> El Paso, Tx.
>>> DM61rt
>>>
>>> Molon labe. [mo-lone lah-veh] Google it...
>>>
>>> =============================================
>>> The United States Constitution (c) 1791. All Rights reserved.
>>> =============================================
>>>
>>>
>>>       
>>>> -----Original Message-----
>>>> From: icom-bounces at mailman.qth.net
>>>> [mailto:icom-bounces at mailman.qth.net] On Behalf Of Larry Winslow
>>>> Sent: Sunday, December 06, 2009 12:37 AM
>>>> To: ICOM Reflector
>>>> Subject: [ICOM] IC-207 problems
>>>>
>>>> I've got 2 problems with my IC-207.
>>>>
>>>> 1) there is not receive audio;
>>>> 2) the display has become strange. Instead of reading
>>>> 146.960, it reads
>>>> d46.960.
>>>>
>>>> Any suggestions?
>>>> Thanks
>>>> 73 - Larry WØNFU
>>>> Lake Forest Park, WA
>>>> larry_w at comcast.net
>>>>
>>>> ----
>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>> Icom FAQ: http://www.qsl.net/icom/
>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>>
>>>>         
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>
>>>
>>>       
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>     
>
> Gary Fiber K8IZ
> GROL PG-19-6691
> Washington State Resident
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>