[ICOM] IC-207 problems

[Gary Fiber]

Larry,

No it was the PDF version of the manual. I don't 
remember a DTMF memory causing the unit not to receive.
Some units do have a DTMF squelch but the IC-207 
does not as far as I remember and read.
Did you try hitting the Function and " D " on the 
mic, maybe you muted the RX audio by accident?
Have you tried an external speaker? Might be a 
faulty external speaker jack. Try installing a 
male plug a few times to see it that restores RX audio.
I have glanced through the IC-207 manual and 
about the only other suggestion I have is a full cpu reset.

Gary K8IZ

At 05:42 PM 12/7/2009, you wrote:
>Hi Gary
>
>I have the manual in a pdf file if that's what you're offering to send
>to me. If you have something more, yes I can accept large emails and
>would appreciating it.
>
>73 - Larry WØNFU
>Lake Forest Park, WA
>larry_w at comcast.net
>
>
>Gary Fiber wrote:
> > Larry,
> >
> > Not sure the entire link will work since you have
> > to agree to a question  but some will get you to
> > the Icom Japan web site. there choose Global in
> > the upper right cornet, then support then manual
> > downloads. The IC-207 manual is some 5 megs in
> > size. http://www.icom.co.jp/world/support/download/manual/pdf/IC-207H.pdf
> > Or I'll save it on my computer and I could email
> > it to you if you can accept such large emails.
> >
> > Icom America's web page no longer has the IC-207
> > on it. On the 207 manual page 46 it talks about
> > programming a DTMF code, there is a "d" in the
> > left side of the display. Press and hold DTMF for
> > about 1 second to get into that mode. Press "SET"
> > to enter programming mode and turn the tuning
> > dial to the desired digit. In your case turn it
> > to the dash "-" for all digits then press the 
> tuning dial to exit that mode.
> > The partial reset will not get rid of DTMF memory
> > channels., the full reset press "SET" and "S. MW"
> > while turn on the power. This may also restart
> > the demo mode to exit that press "BAND" while pressing PWR.
> >
> > Gary K8IZ
> >
> >
> >
> >
> > At 10:52 PM 12/6/2009, you wrote:
> >
> >> Thanks to all for the suggestions. I was tempted to do a master reset
> >> but will other actions first.
> >>
> >> Now I've got to find my manual which might be difficult as we move a
> >> couple of months ago & I don't have everything unpacked!!!!
> >>
> >> Again, thanks
> >> 73 - Larry WØNFU
> >> Lake Forest Park, WA
> >> larry_w at comcast.net
> >>
> >>
> >> Edward L. Dowdy wrote:
> >>
> >>> Sounds like its set for tone squelch. Won't
> >>>
> >> hear a peep without the correct
> >>
> >>> tone on the signal.
> >>>
> >>> Ed
> >>>
> >>> ----- Original Message -----
> >>> From: "Mike Olbrisch" <mike-2007 at elp.rr.com>
> >>> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> >>> Sent: Sunday, December 06, 2009 8:22 AM
> >>> Subject: Re: [ICOM] IC-207 problems
> >>>
> >>>
> >>>
> >>> Hmmm - not having a 207 - I can only guess.  BUT - before you send it off
> >>> for
> >>> repairs, try a master reset.  Yes - you will need to reprogram it.  You
> >>> would
> >>> probably need to do that when it returns 
> anyway.  However, if it works, no
> >>> need
> >>> to send it off.
> >>>
> >>> Good luck.
> >>>
> >>> Mike - KD9KC.
> >>> El Paso, Tx.
> >>> DM61rt
> >>>
> >>> Molon labe. [mo-lone lah-veh] Google it...
> >>>
> >>> =============================================
> >>> The United States Constitution (c) 1791. All Rights reserved.
> >>> =============================================
> >>>
> >>>
> >>>
> >>>> -----Original Message-----
> >>>> From: icom-bounces at mailman.qth.net
> >>>> [mailto:icom-bounces at mailman.qth.net] On Behalf Of Larry Winslow
> >>>> Sent: Sunday, December 06, 2009 12:37 AM
> >>>> To: ICOM Reflector
> >>>> Subject: [ICOM] IC-207 problems
> >>>>
> >>>> I've got 2 problems with my IC-207.
> >>>>
> >>>> 1) there is not receive audio;
> >>>> 2) the display has become strange. Instead of reading
> >>>> 146.960, it reads
> >>>> d46.960.
> >>>>
> >>>> Any suggestions?
> >>>> Thanks
> >>>> 73 - Larry WØNFU
> >>>> Lake Forest Park, WA
> >>>> larry_w at comcast.net
> >>>>
> >>>> ----
> >>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> >>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> >>>> Icom FAQ: http://www.qsl.net/icom/
> >>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> >>>>
> >>>>
> >>> ----
> >>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> >>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> >>> Icom FAQ: http://www.qsl.net/icom/
> >>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> >>>
> >>> ----
> >>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> >>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> >>> Icom FAQ: http://www.qsl.net/icom/
> >>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> >>>
> >>>
> >>>
> >> ----
> >> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> >> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> >> Icom FAQ: http://www.qsl.net/icom/
> >> To support QSL/QTH.net: http://www.qsl.net/donate.html
> >>
> >
> > Gary Fiber K8IZ
> > GROL PG-19-6691
> > Washington State Resident
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> >
> >
>----
>Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>To support QSL/QTH.net: http://www.qsl.net/donate.html

Gary Fiber K8IZ
GROL PG-19-6691
Washington State Resident