[ICOM] IC-207 problems

[Gary Fiber]

Larry,

Not sure the entire link will work since you have 
to agree to a question  but some will get you to 
the Icom Japan web site. there choose Global in 
the upper right cornet, then support then manual 
downloads. The IC-207 manual is some 5 megs in 
size. http://www.icom.co.jp/world/support/download/manual/pdf/IC-207H.pdf
Or I'll save it on my computer and I could email 
it to you if you can accept such large emails.

Icom America's web page no longer has the IC-207 
on it. On the 207 manual page 46 it talks about 
programming a DTMF code, there is a "d" in the 
left side of the display. Press and hold DTMF for 
about 1 second to get into that mode. Press "SET" 
to enter programming mode and turn the tuning 
dial to the desired digit. In your case turn it 
to the dash "-" for all digits then press the tuning dial to exit that mode.
The partial reset will not get rid of DTMF memory 
channels., the full reset press "SET" and "S. MW" 
while turn on the power. This may also restart 
the demo mode to exit that press "BAND" while pressing PWR.

Gary K8IZ




At 10:52 PM 12/6/2009, you wrote:
>Thanks to all for the suggestions. I was tempted to do a master reset
>but will other actions first.
>
>Now I've got to find my manual which might be difficult as we move a
>couple of months ago & I don't have everything unpacked!!!!
>
>Again, thanks
>73 - Larry WØNFU
>Lake Forest Park, WA
>larry_w at comcast.net
>
>
>Edward L. Dowdy wrote:
> > Sounds like its set for tone squelch. Won't 
> hear a peep without the correct
> > tone on the signal.
> >
> > Ed
> >
> > ----- Original Message -----
> > From: "Mike Olbrisch" <mike-2007 at elp.rr.com>
> > To: "'ICOM Reflector'" <icom at mailman.qth.net>
> > Sent: Sunday, December 06, 2009 8:22 AM
> > Subject: Re: [ICOM] IC-207 problems
> >
> >
> >
> > Hmmm - not having a 207 - I can only guess.  BUT - before you send it off
> > for
> > repairs, try a master reset.  Yes - you will need to reprogram it.  You
> > would
> > probably need to do that when it returns anyway.  However, if it works, no
> > need
> > to send it off.
> >
> > Good luck.
> >
> > Mike - KD9KC.
> > El Paso, Tx.
> > DM61rt
> >
> > Molon labe. [mo-lone lah-veh] Google it...
> >
> > =============================================
> > The United States Constitution (c) 1791. All Rights reserved.
> > =============================================
> >
> >
> >> -----Original Message-----
> >> From: icom-bounces at mailman.qth.net
> >> [mailto:icom-bounces at mailman.qth.net] On Behalf Of Larry Winslow
> >> Sent: Sunday, December 06, 2009 12:37 AM
> >> To: ICOM Reflector
> >> Subject: [ICOM] IC-207 problems
> >>
> >> I've got 2 problems with my IC-207.
> >>
> >> 1) there is not receive audio;
> >> 2) the display has become strange. Instead of reading
> >> 146.960, it reads
> >> d46.960.
> >>
> >> Any suggestions?
> >> Thanks
> >> 73 - Larry WØNFU
> >> Lake Forest Park, WA
> >> larry_w at comcast.net
> >>
> >> ----
> >> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> >> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> >> Icom FAQ: http://www.qsl.net/icom/
> >> To support QSL/QTH.net: http://www.qsl.net/donate.html
> >>
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> >
> >
>----
>Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>To support QSL/QTH.net: http://www.qsl.net/donate.html

Gary Fiber K8IZ
GROL PG-19-6691
Washington State Resident