[ICOM] IC271H memories reset

[Dave]

There is an Italian HAM who make as replacement RAM card that is easily 
installed. I have one in my 1271 and had one in my 271 (which I traded 
in on a 910H). Both worked very well and the are NON VOLATILE.

If he still makes them contact:

Roberto Nardo, IK2RND

It's been several years since I contacted him.
His email is (was) roberto.nardo at pv.infn.it

Dave, W5WP

Jim Gomez wrote:
> Thank you, Walt, in fact no ggod news but if there is nothing else to do,
> the owner of the radio will have to forget about it....
>
> 73,
>
> Jim, HK1N
>
> On Mon, Aug 24, 2009 at 9:08 AM, Walt Heilsnis - WB2VSJ <
> wb2vsj at earthlink.net> wrote:
>
>   
>> Not sure you are gonna like this answer:
>>
>> >From the ICOM Website:
>> "IC-271A/H - Reprogram the RAM card."
>>
>> http://www.icomcanada.com/techbulletin/tb1/cpureset.htm#amateur
>>
>>
>> Walt - WB2VSJ
>>
>> -----Original Message-----
>>     
>>> From: Jim Gomez <cwdx.hk1n at gmail.com>
>>> Sent: Aug 24, 2009 9:47 AM
>>> To: ICOM Reflector <Icom at mailman.qth.net>
>>> Subject: [ICOM] IC271H memories reset
>>>
>>> Does any one knows of a procedure to reset the micrdoprocessor (including
>>> the memories) in the 271H? I know that the RAM unit battery cannot be
>>> disconnected to do it.
>>> Thank you, appreciate any help,
>>>
>>> --
>>> Jim, HK1N
>>>
>>>
>>>
>>> --
>>> Jim, HK1N
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>       
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
>>     
>
>
>
>