[ICOM] IC271H memories reset

[Jim Gomez]

Thank you, Walt, in fact no ggod news but if there is nothing else to do,
the owner of the radio will have to forget about it....

73,

Jim, HK1N

On Mon, Aug 24, 2009 at 9:08 AM, Walt Heilsnis - WB2VSJ <
wb2vsj at earthlink.net> wrote:

> Not sure you are gonna like this answer:
>
> >From the ICOM Website:
> "IC-271A/H - Reprogram the RAM card."
>
> http://www.icomcanada.com/techbulletin/tb1/cpureset.htm#amateur
>
>
> Walt - WB2VSJ
>
> -----Original Message-----
> >From: Jim Gomez <cwdx.hk1n at gmail.com>
> >Sent: Aug 24, 2009 9:47 AM
> >To: ICOM Reflector <Icom at mailman.qth.net>
> >Subject: [ICOM] IC271H memories reset
> >
> >Does any one knows of a procedure to reset the micrdoprocessor (including
> >the memories) in the 271H? I know that the RAM unit battery cannot be
> >disconnected to do it.
> >Thank you, appreciate any help,
> >
> >--
> >Jim, HK1N
> >
> >
> >
> >--
> >Jim, HK1N
> >----
> >Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> >Icom Users Net: Sundays, 1700Z, 14.316 MHz
> >Icom FAQ: http://www.qsl.net/icom/
> >To support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>



-- 
Jim, HK1N