[ICOM] IC271H memories reset

[Jim Gomez]

Thanks to all who answered my request about the IC-271H memory. I forwarded
the info to the rig's owner, HK6AN,

Jim, HK1N

On Mon, Aug 24, 2009 at 9:56 AM, Dave <dave at wpaperman.com> wrote:

> There is an Italian HAM who make as replacement RAM card that is easily
> installed. I have one in my 1271 and had one in my 271 (which I traded
> in on a 910H). Both worked very well and the are NON VOLATILE.
>
> If he still makes them contact:
>
> Roberto Nardo, IK2RND
>
> It's been several years since I contacted him.
> His email is (was) roberto.nardo at pv.infn.it
>
> Dave, W5WP
>
> Jim Gomez wrote:
> > Thank you, Walt, in fact no ggod news but if there is nothing else to do,
> > the owner of the radio will have to forget about it....
> >
> > 73,
> >
> > Jim, HK1N
> >
> > On Mon, Aug 24, 2009 at 9:08 AM, Walt Heilsnis - WB2VSJ <
> > wb2vsj at earthlink.net> wrote:
> >
> >
> >> Not sure you are gonna like this answer:
> >>
> >> >From the ICOM Website:
> >> "IC-271A/H - Reprogram the RAM card."
> >>
> >> http://www.icomcanada.com/techbulletin/tb1/cpureset.htm#amateur
> >>
> >>
> >> Walt - WB2VSJ
> >>
> >> -----Original Message-----
> >>
> >>> From: Jim Gomez <cwdx.hk1n at gmail.com>
> >>> Sent: Aug 24, 2009 9:47 AM
> >>> To: ICOM Reflector <Icom at mailman.qth.net>
> >>> Subject: [ICOM] IC271H memories reset
> >>>
> >>> Does any one knows of a procedure to reset the micrdoprocessor
> (including
> >>> the memories) in the 271H? I know that the RAM unit battery cannot be
> >>> disconnected to do it.
> >>> Thank you, appreciate any help,
> >>>
> >>> --
> >>> Jim, HK1N
> >>>
> >>>
> >>>
> >>> --
> >>> Jim, HK1N
> >>> ----
> >>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> >>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> >>> Icom FAQ: http://www.qsl.net/icom/
> >>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> >>>
> >> ----
> >> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> >> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> >> Icom FAQ: http://www.qsl.net/icom/
> >> To support QSL/QTH.net: http://www.qsl.net/donate.html
> >>
> >>
> >
> >
> >
> >
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>



-- 
Jim, HK1N