[ICOM] CT 17 interface

[Jim Miller KG0KP]

Like Dick said, it should work just fine.   BUT if you are using some 
adapter that you have to also use a gender changer (male to female or female 
to male) the 25 to 9 you are using is probably NOT for a comm cable and 
probably is not wired correctly for what you need.

73, de Jim KG0KP

----- Original Message ----- 
From: "peter Jackson" <peter.jackson17 at ntlworld.com>
To: "icom" <icom at mailman.qth.net>
Sent: Tuesday, August 11, 2009 11:38 AM
Subject: [ICOM] CT 17 interface


> Hi, I have been trying to get a IC756pro3 to work with a CT17 interface 
> for my pal. The interface has a 25 pin D type socket/plug, will a 25 pin 
> to 9pin adaptor work with it? I have been trying to get it to work to no 
> avail. I am familiar with the rig as I have one, I built my own interface 
> and it works fine, so I do know about baud rates, addresses etc. So does 
> anyone know if the adaptors work please.
> 73 Pete G3KNU
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>