[ICOM] Carry Handle

[Donald Sanders]

Gary, check the internal jumpers for the filters.Someone may have removed
the CW filter and not changed the filter jumpers. Good luck, I have 2 Icom
735's and love them.

Healthfully yours,
                          Don W4BWS
----- Original Message ----- 
From: "Gary Nichols" <kd9sv at comcast.net>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Saturday, May 26, 2007 12:18 PM
Subject: RE: [ICOM] Carry Handle


> Blair, will do...it looks like the screw spacing is closer on the 735 but
> perhaps the handle can be shortened to fit...will let you know about that.
> Can you tell me if the CW filters are plugged in or soldered in?  I just
> bought this 735 and it has the FL63A filter but in the narrow CW position
> the audio is dead.  Also the RIT does not appear to function...hope I
didn't
> get a defective unit here.  CW output seems to be ok and the keyer works
> like it should.  Any suggestions about the filter would be helpful...de
gary
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On
> Behalf Of ynkedragon at aol.com
> Sent: Friday, May 25, 2007 10:40 AM
> To: icom at mailman.qth.net
> Subject: Re: [ICOM] Carry Handle
>
> If the MB-23 fits the '735 would you please post that information here.
>  I'm interested in adding a carry handle to mine.
>
> 73, Blair K3YD
>
>
> -----Original Message-----
> From: Gary Nichols <kd9sv at comcast.net>
> To: 'ICOM Reflector' <icom at mailman.qth.net>
> Sent: Thu, 24 May 2007 3:28 pm
> Subject: RE: [ICOM] Carry Handle
>
>
>
> Thanks Gary, I know the MB-23 fit the 725 so I suspect it would also
> fit the
> 735 and 746pro but not sure about the 751 as it was a little bigger
> radio.
> I ordered 3 of them from Universal Radio and if they don't fit will send
> them back...de gary, kd9sv
>
> -----Original Message-----
>  From: icom-bounces at mailman.qth.net
> [mailto:icom-bounces at mailman.qth.net] On
> Behalf Of Gary P. Fiber
> Sent: Thursday, May 24, 2007 5:18 PM
> To: ICOM Reflector
> Subject: Re: [ICOM] Carry Handle
>
> Gary,
>
> The MB-23 fits the IC-718 and I suspect the 746Pro too.
> I don't remember an accessory carry handle for the IC-735 and forget if
> the IC-751A came with one.
> The MB-23 possibly could be utilized for all the radios you listed but
> you may have to use some improvised mounting screws and hardware.
>
> Gary K8IZ
>
> Gary Nichols wrote:
> > I am looking for a source of carry handles for a couple different Icom
> > radios, the 735, 746pro and 751A and am not finding anything online.
> Anyone
> > on the reflector know of a source for these please respond off line.
> >
> > Thanks in advance, de gary, kd9sv
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
> > .
> >
> >
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
> ________________________________________________________________________
> AOL now offers free email to everyone.  Find out more about what's free
> from AOL at AOL.com.
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>