[ICOM] Carry Handle

Gary Nichols kd9sv at comcast.net
Sat May 26 13:18:47 EDT 2007


Blair, will do...it looks like the screw spacing is closer on the 735 but
perhaps the handle can be shortened to fit...will let you know about that.
Can you tell me if the CW filters are plugged in or soldered in?  I just
bought this 735 and it has the FL63A filter but in the narrow CW position
the audio is dead.  Also the RIT does not appear to function...hope I didn't
get a defective unit here.  CW output seems to be ok and the keyer works
like it should.  Any suggestions about the filter would be helpful...de gary

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of ynkedragon at aol.com
Sent: Friday, May 25, 2007 10:40 AM
To: icom at mailman.qth.net
Subject: Re: [ICOM] Carry Handle

If the MB-23 fits the '735 would you please post that information here. 
 I'm interested in adding a carry handle to mine.

73, Blair K3YD


-----Original Message-----
From: Gary Nichols <kd9sv at comcast.net>
To: 'ICOM Reflector' <icom at mailman.qth.net>
Sent: Thu, 24 May 2007 3:28 pm
Subject: RE: [ICOM] Carry Handle



Thanks Gary, I know the MB-23 fit the 725 so I suspect it would also 
fit the
735 and 746pro but not sure about the 751 as it was a little bigger 
radio.
I ordered 3 of them from Universal Radio and if they don't fit will send
them back...de gary, kd9sv

-----Original Message-----
 From: icom-bounces at mailman.qth.net 
[mailto:icom-bounces at mailman.qth.net] On
Behalf Of Gary P. Fiber
Sent: Thursday, May 24, 2007 5:18 PM
To: ICOM Reflector
Subject: Re: [ICOM] Carry Handle

Gary,

The MB-23 fits the IC-718 and I suspect the 746Pro too.
I don't remember an accessory carry handle for the IC-735 and forget if
the IC-751A came with one.
The MB-23 possibly could be utilized for all the radios you listed but
you may have to use some improvised mounting screws and hardware.

Gary K8IZ

Gary Nichols wrote:
> I am looking for a source of carry handles for a couple different Icom
> radios, the 735, 746pro and 751A and am not finding anything online.
Anyone
> on the reflector know of a source for these please respond off line.
>
> Thanks in advance, de gary, kd9sv
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
> .
>
>

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/


________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free 
from AOL at AOL.com.
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/




More information about the Icom mailing list