[ICOM] IC775DSP and Rigblaster PRO - failure to transmit

[Carl Vangsness]

On further review, the RigBlasterPro is trying to cause Transmit via 
serial (CI-V) command. All the other commands to change frequency, mode, 
filter, etc. work fine. Can it be that there is no CI-V command for the 
775 to transmit (or mimic PTT)?

Carl WCØV

Carl Vangsness wrote:
> One of the things I had been looking forward to in recent retirement is 
> the possibility of ham radio with a variety of modes using the 
> Rigblaster Pro. Only problem is I can't seem to get any of the usual 
> programs, Digipan, MixW, MMTTY, Hamradio Deluxe, and others to get the 
> 775 to transmit. I have reviewed the jumper cable and jumper settings ad 
> nauseam and can't seem to find the issue. I had the same Rigblaster pro 
> connected to my earlier FT1000 MkV and got annoyed when the RBpro would 
> key up the MkV when the RBpro and the computer were first powered up. 
> Not with the 775.
> 
> Anybody with any experience with the 775 and the Rigblaster Pro and any 
> hints?
> 
> Tnx es 73, de Carl WCØV
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>