[ICOM] IC775DSP and Rigblaster PRO - failure to transmit

[Vladimir Sidorov]

Correct. The 775 does not support PTT via CI-V.

73,
Vladimir VE3IAE

---



> On further review, the RigBlasterPro is trying to cause Transmit via 
> serial (CI-V) command. All the other commands to change frequency, mode, 
> filter, etc. work fine. Can it be that there is no CI-V command for the 
> 775 to transmit (or mimic PTT)?
>
> Carl WCØV
>
> Carl Vangsness wrote:
>> One of the things I had been looking forward to in recent retirement is 
>> the possibility of ham radio with a variety of modes using the Rigblaster 
>> Pro. Only problem is I can't seem to get any of the usual programs, 
>> Digipan, MixW, MMTTY, Hamradio Deluxe, and others to get the 775 to 
>> transmit. I have reviewed the jumper cable and jumper settings ad nauseam 
>> and can't seem to find the issue. I had the same Rigblaster pro connected 
>> to my earlier FT1000 MkV and got annoyed when the RBpro would key up the 
>> MkV when the RBpro and the computer were first powered up. Not with the 
>> 775.
>>
>> Anybody with any experience with the 775 and the Rigblaster Pro and any 
>> hints?
>>
>> Tnx es 73, de Carl WCØV
>> ----
>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>