[ICOM] IC775DSP and Rigblaster PRO - failure to transmit

[Clif Holland]

That's easy, turn on the computer, check your e-mail and then turn on the 
radio and check voice mail.....

Clif Holland KA5IPF
www.avvid.com




----- Original Message ----- 
From: "Mike Mellinger WA0SXV" <wa0sxv at mellinger.com>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Thursday, March 22, 2007 10:57 AM
Subject: RE: [ICOM] IC775DSP and Rigblaster PRO - failure to transmit


Don't blame the RB Pro for the PTT on computer reboot.  It is the operating
system testing the serial port that the RB is connected to.  I don't believe
that there is anything to be done about that.

73,
Mike WAØSXV

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Carl Vangsness
Sent: Thursday, March 22, 2007 10:49
To: ICOM Reflector
Subject: [ICOM] IC775DSP and Rigblaster PRO - failure to transmit

One of the things I had been looking forward to in recent retirement is
the possibility of ham radio with a variety of modes using the
Rigblaster Pro. Only problem is I can't seem to get any of the usual
programs, Digipan, MixW, MMTTY, Hamradio Deluxe, and others to get the
775 to transmit. I have reviewed the jumper cable and jumper settings ad
nauseam and can't seem to find the issue. I had the same Rigblaster pro
connected to my earlier FT1000 MkV and got annoyed when the RBpro would
key up the MkV when the RBpro and the computer were first powered up.
Not with the 775.

Anybody with any experience with the 775 and the Rigblaster Pro and any
hints?

Tnx es 73, de Carl WCØV


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/