[ICOM] IC775DSP and Rigblaster PRO - failure to transmit

[Mike Mellinger WA0SXV]

Don't blame the RB Pro for the PTT on computer reboot.  It is the operating
system testing the serial port that the RB is connected to.  I don't believe
that there is anything to be done about that.

73,
Mike WAØSXV

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Carl Vangsness
Sent: Thursday, March 22, 2007 10:49
To: ICOM Reflector
Subject: [ICOM] IC775DSP and Rigblaster PRO - failure to transmit

One of the things I had been looking forward to in recent retirement is 
the possibility of ham radio with a variety of modes using the 
Rigblaster Pro. Only problem is I can't seem to get any of the usual 
programs, Digipan, MixW, MMTTY, Hamradio Deluxe, and others to get the 
775 to transmit. I have reviewed the jumper cable and jumper settings ad 
nauseam and can't seem to find the issue. I had the same Rigblaster pro 
connected to my earlier FT1000 MkV and got annoyed when the RBpro would 
key up the MkV when the RBpro and the computer were first powered up. 
Not with the 775.

Anybody with any experience with the 775 and the Rigblaster Pro and any 
hints?

Tnx es 73, de Carl WCØV