[ICOM] help needed in A6 with new 7800 and PW1

[dmeitzen at tx.rr.com]

Hold the buttons and turn the main tuning dial on the 7800 until the light stops blinking on the PW1 control head. Then turn off the PW1. When you power the PW1 back up it will follow the 7800
FYI
Dave AA9TT
---- Dick Dievendorff <dieven at comcast.net> wrote: 
> Try this:
> http://icomamerica.com/en/support/kb/Article.aspx?ArticleNumber=615A26584A
> 
> There's a place where you want to turn off the transceiver that isn't
> immediately obvious from the PW-1 instruction manual.
> 
> Dick, K6KR
> 
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
> Behalf Of Don Greenbaum
> Sent: Wednesday, December 05, 2007 9:48 AM
> To: icom at mailman.qth.net
> Subject: [ICOM] help needed in A6 with new 7800 and PW1
> 
> I am currently in A6 at A61ADs setting up a new 7800 and PW1.
> 
> THe PW1 just doesn't want to follow the 7800.  I'm positive we have it 
> hooked up right.  The manual says to reset the linear by holding the 
> up/down buttons and then hitting the power button.
> 
> It doesn't appear to do anything.
> 
> AND, if you hold the input button and POWER button the input button doesn't 
> flash so I can turn the dial knob on the 7800 and calibrate it.
> 
> I'd hate to think this is DOA all the way here.
> 
> Any suggestions would be appreciated.
> 73
> Don
> N1DG
> 
> -----------------------------------------------------
> N1DG--Licensed since 1962
> EX-WB2DND, A61AD (GUEST OP, QSL MGR), A52DG, /KH9, /BV, /VS6, /4X, /9V
> Pilot:  VU7RG, 3Y0X, VK9ML, D68C, VK0IR, K8XP/KH9, 9M0C, ZK1XXP, ZL9CI
> Webmaster: BS7H, K5K, A52A, VK0IR, 9M0C, ZK1XXP, WB2DND/KH9, BQ9P, ZL9CI
> QSL Manager:  A61AD, A61AO, A61X, A61AQ, KH7Z
> Member:  FOC, ARRL, DDXA, YCCC
> 2006 Inductee into the CQ DX Hall of Fame
> DON GREENBAUM , DUXBURY, MA, USA
> AIM:  aurumtel
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/