[ICOM] IC-706 Set Mode Problem

[John Germanos]

Gary,

Thanks. I beleive your are correct. Tried changing other settings, no go.
 I will try re-seating all connectors and screws. If that does not help, 
looks like a trip to Icom.

73 John WB9PNU

----- Original Message ----- 
From: "Gary Fiber" <gfiber at clearwire.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Sunday, August 26, 2007 7:04 PM
Subject: Re: *****SPAM***** Re: [ICOM] IC-706 Set Mode Problem


> Well if the reset does not work and you followed the instruction manual 
> exactly for installing and enabling the filter, then I would figure the 
> rig is in trouble.
> Not much else to do.
> I figure the eeprom is where the filter settings are stored and that 
> device might be bad or that section. The theory of operation in the 
> service manual would likely tell a bit more where the filter settings 
> are stored.
> 
> Gary K8IZ
>