[ICOM] PW-1 What does this mean?
we1x at comcast.net
we1x at comcast.net
Sat Mar 4 13:54:06 EST 2006
Any chance the ALC is not properly adjusted thereby throwing the amp into protection?
-------------- Original message --------------
From: "Tony Visco" <ahv73 at verizon.net>
> Thanks for the suggestion Harry,
>
>
>
> But
>
>
>
> It didn't work.
>
> That is I reset the PW-1 as in the start up procedures for it to acquire
> information from my Icom 746pro. I have also tried tuning the antenna under
> reduced power without any luck. The Amp protect is still activated
> instantly.
>
>
>
> Might there be any other suggestions.
>
>
>
> Tony W3EW
>
>
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
> Behalf Of we1x at comcast.net
> Sent: Saturday, March 04, 2006 9:36 AM
> To: ICOM Reflector
> Subject: RE: [ICOM] PW-1 What does this mean?
>
>
>
> Tony,
>
>
>
> Try a full reset and see what happens.
>
>
>
> Harry WE1X
>
>
>
> -------------- Original message --------------
>
> From: "Tony Visco"
>
>
>
> > Fellow Hams,
>
> > The ole PW-1 seems to have come up with another problem. Tonight when
>
> > operating on any band the Amp/Protect circuit activates rendering the
> linear
>
> > useless each time I attempt to use it.
>
> >
>
> > The Auto lamp blinks which according to the manual on page 14 indicates
> that
>
> > "The Power Level of the 4 PA unites becomes unbalanced."
>
> > OK - but everything was working just fine yesterday now its not today?
>
> >
>
> > How would the PA units have become unbalanced and what measures need to be
>
>
> > taken to correct this issue.
>
> >
>
> > I'm using an Icom 746pro as my primary exciter.
>
> >
>
> > Thanks in advance for the divine guidance.
>
> >
>
> > Tony W3EW
>
> >
>
> > ----
>
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
>
> > Icom FAQ: http://www.qsl.net/icom/
>
> ----
>
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>
> Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
More information about the Icom
mailing list