[ICOM]PW-1 ALC

[Adam Farson]

Hi Steve, 

It is actually under a link which read "Get IIC-PW1 Documents". I can see
that the URL was somewhat ambiguous.

To correct this, I have renamed the link "IC-PW1 Service Manual etc."

Cheers for now, 73,
Adam VA7OJ/AB4OJ


-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Steve
Sent: 16 January 2006 14:15
To: ICOM Reflector
Subject: Re: [ICOM]PW-1 ALC

Adam,

I looked through the IC-PW1 links at www.qsl.net/icom/manuals.html but do
not find the service manual you reference.

Would you be so kind as to point me to it?

Thanks.

Steve K8JQ

Adam Farson wrote:
> Hi Tony,
> 
> The ALC pots are R1 and R2 on the JACK-1 board. One can order them 
> from Icom Parts (P/N 7310003820).
> 
> You will need the service manual to tackle repairs. The manual is 
> downloadable here:
> 
> http://www.qsl.net/icom/manuals.html
> 
> In the meantime, you can use the Exciter 2 position.
> 
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
>  
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of Tony Visco
> Sent: 15 January 2006 15:48
> To: 'ICOM Reflector'
> Subject: RE: [ICOM]PW-1 ALC
> 
> 
> Ouch,
> 
> I was installing a new exciter and was adjusting the ALC which is a 
> little difficult because of my remote location for the Linear.  
> Unfortunately I feel it is difficult to feel the adjusting screw move 
> and of course the plastic adjustment made a snap sound which meant I 
> may have pushed a little hard.
> 
> It is now on a bit of an angle and of course the ALC is spiking over 
> the recommended setting.
> 
> Is this a component that is accessible?? If so could I likely adjust 
> it with the damaged plastic adjustment?
> 
> Is this a component that can be replaced by me?
> 
> Any helpful advice will be appreciated.
> 
> Tony W3EW
> 
> 
> 
> Scanned for viruses by Blue Coat
> http://www.WinProxy.com/
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom 
> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> http://www.qsl.net/icom/
> 
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/



Scanned for viruses by Blue Coat
http://www.WinProxy.com/