[ICOM] IC2KL Bias supply

[W. David Paperman]

Hi, Adam;

No, I have no experience with Yaesu equipment other than the FT 101 
series and the FL amplifiers. The amplifier I was referring to was the 
SG-500. It is not as forgiving (well protected) as the IC2KL but is 
quite rugged and, above all, very easy to service.

After several unacceptable experiences with both Yaesu and Kenwood I 
settled in with Icom, in great part due to the superb service support.

I limit the time I have available for service work on Icom products 
(primarily supporting a local dealer and overseas clients), 
"boatanchors" and rebuilding TelRex rotators (I have small machine 
shop). After all, I was told when I retired that all I am supposed to do 
is chase DX, contest, and maintain my "estate", Ant-Hill. Obviously not 
the case!

My IC2KL is also on its' 4th exciter. I started with an IC 720, then IC- 
740, a 756 and now a 756 Pro II. If the gods smile on me I will 
eventually go to the Pro III. The 7800 is great but all my gear, 
excepting the amplifiers and tower rotators, are powered by two large 
battery banks. Unfortunately, the 7800 is not "battery friendly".

Be well;

Dave, W5WP

Adam Farson wrote:

> Hi Dave,
> 
> Is your Brand 'X' a Yaesu Quadra perchance?