[ICOM] Help Conn

[Gary P. Fiber]

Yep, thats about it. There are some subtle changes with in, mostly firmware I
seem to remember.

Gary K8IZ

> I believe the AH-3 is more or less the AH-2 minus the controller unit.
>
> 73 de Dick - KA5KKT
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
> Behalf Of C Whitaker
> Sent: Wednesday, December 20, 2006 9:46 AM
> To: ICOM Reflector
> Subject: Re: [ICOM] Help Conn
>
> de WB2CPN
> Yes.  You'll need the AH-2 Control Unit that goes between the 751 and the
> antenna tuning unit.
> There are now other Control Units available from other suppliers because the
> ICOM unit is getting hard to find.  I have used the AH-2 and AH-4 on both
> the 751 and the 751A.  Still do.  (You'll also need an ICOM  adapter for the
> multi-pin socket on the radio.  Otherwise you can wire in a DIN socket.
> 73  Clete
>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
> Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>



Gary P. Fiber K8IZ
GROL PG-19-6691
Washington State Resident