[ICOM] Help Conn

[Edward Dickinson, III]

I believe the AH-3 is more or less the AH-2 minus the controller unit.

73 de Dick - KA5KKT 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of C Whitaker
Sent: Wednesday, December 20, 2006 9:46 AM
To: ICOM Reflector
Subject: Re: [ICOM] Help Conn

de WB2CPN
Yes.  You'll need the AH-2 Control Unit that goes between the 751 and the
antenna tuning unit.
There are now other Control Units available from other suppliers because the
ICOM unit is getting hard to find.  I have used the AH-2 and AH-4 on both
the 751 and the 751A.  Still do.  (You'll also need an ICOM  adapter for the
multi-pin socket on the radio.  Otherwise you can wire in a DIN socket. 
73  Clete



----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/