[ICOM] Re: Standby Switch?

[Jerry Keller]

No problem here, Vladimir.... I will pick up an SP-20 or Sp-23 when I find a 
good one at the right price on e-bay. I do appreciate you taking the time to 
answer my inquiry. In fact, as a result, I did learn something about the 
timer... so thanks for that, my friend. Merry Christmas and...
73, Jerry K3BZ

----- Original Message ----- 
From: "Vladimir V. Sidorov" <vs_otw at rogers.com>
To: <icom at mailman.qth.net>
Sent: Saturday, December 16, 2006 10:44 AM
Subject: Re: [ICOM] Re: Standby Switch?


> Sorry, kinda mess... Indeed, the ON/OFF switch toggles timer, not Standby. 
> Though there had to be a button with light behind it somewhere... And 
> thanks to Dave, my mistake is corrected, I was thinking about SP-20.
> Jerry, I hope, you have any of the speakers and can play either by muting 
> one of sources or just toggle them.
>
> Sorry for my mistake.
>
> 73,
> Vladimir VE3IAE
>
> --
>
>
>
>
>
>
>
>
>
>> The SP-20 and SP-23 speakers provide a convenient (albeit, pricey) 
>> solution to this problem. They allow switching between two sources as 
>> well as silencing the audio (with appropriate load). A side benefit is 
>> the audio filtering that is incorporated in both. Physically the SP-23 
>> matches the Pro line better but I find the larger speaker and enclosure 
>> of the SP-20 more pleasing. And it also provides a line-out jack that the 
>> SP-23 does not.
>>
>> 73, Dave K4QT
>>
>>>Date: Fri, 15 Dec 2006 19:36:06 -0500
>>>From: "Jerry Keller" <k3bz at arrl.net>
>>>Subject: Re: [ICOM] Standby Switch?
>>>
>>>Gee, guys, I didn't mean to confuse everyone 8^)  I sit here with my 
>>>756Pro2
>>>and Pro3 going and I find something I want to listen to on one of them, 
>>>so I
>>>want to shut off the audio on the other one, quickly, easily, and in a 
>>>way
>>>that I can return to the previously set audio level quickly and easily.
>>>Years ago, rigs almost always had a "STANDBY" switch on the front panel 
>>>for
>>>that (granted, that "STANDBY" switch did more than just shut off the 
>>>audio).
>>>The only way I can figure to do it with these super-duper modern rigs is 
>>>to
>>>use the switch-out in the Phones jack... there should be a better way, 
>>>right
>>>on the front panel, and I was just wondering if I was missing that....
>>>73, Jerry K3BZ
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/