[ICOM] Standby Switch?

[Jerry Keller]

Thanks, Vladimir, but that does not work with my Pro3. It will turn off with 
a longer push, but the short push does nothing.... no red light, no standby. 
I checked the manual, and that red light is an indicator for the timer 
function, not standby. I'm now thinking there simply is no standby feature, 
and I had best either rig a separate audio on/off switch, or continue using 
the phones jack as I have been.
73, Jerry K3BZ

----- Original Message ----- 
From: "Vladimir V. Sidorov" <vs_otw at rogers.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Friday, December 15, 2006 8:24 PM
Subject: Re: [ICOM] Standby Switch?


> Jerry,
> Somebody has already answered you. Just push the ON/OFF button quickly. It
> turns the radio into the Stand By position. Red light turns on behind the
> button. Quickly pushing it again turns the rig back on. If you push this
> button for longer time, the rig goes off completely and no light turns on
> behind the button.
>
> 73,
> Vladimir VE3IAE
>
> ---
>
>
>
>
> ----- Original Message ----- 
> From: "Jerry Keller" <k3bz at arrl.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Saturday, December 16, 2006 12:36 AM
> Subject: Re: [ICOM] Standby Switch?
>
>
>> Gee, guys, I didn't mean to confuse everyone 8^)  I sit here with my
> 756Pro2
>> and Pro3 going and I find something I want to listen to on one of them, 
>> so
> I
>> want to shut off the audio on the other one, quickly, easily, and in a 
>> way
>> that I can return to the previously set audio level quickly and easily.
>> Years ago, rigs almost always had a "STANDBY" switch on the front panel
> for
>> that (granted, that "STANDBY" switch did more than just shut off the
> audio).
>> The only way I can figure to do it with these super-duper modern rigs is
> to
>> use the switch-out in the Phones jack... there should be a better way,
> right
>> on the front panel, and I was just wondering if I was missing that....
>> 73, Jerry K3BZ
>>
>> ----- Original Message ----- 
>> From: "Mike Olbrisch" <mike2004 at elp.rr.com>
>> To: "'ICOM Reflector'" <icom at mailman.qth.net>
>> Sent: Friday, December 15, 2006 6:46 PM
>> Subject: RE: [ICOM] Standby Switch?
>>
>>
>> >
>> >
>> >> I'm obviously missing something here (I hate it when I do that....)
>> >>
>> >>73, Dick
>> >
>> > No Dick - you don't miss a THING!
>> >
>> > Mike.
>> >
>> > ----
>> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> > Icom FAQ: http://www.qsl.net/icom/
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/