[ICOM] Standby Switch?

[Vladimir V. Sidorov]

Jerry,
Somebody has already answered you. Just push the ON/OFF button quickly. It
turns the radio into the Stand By position. Red light turns on behind the
button. Quickly pushing it again turns the rig back on. If you push this
button for longer time, the rig goes off completely and no light turns on
behind the button.

73,
Vladimir VE3IAE

---




----- Original Message ----- 
From: "Jerry Keller" <k3bz at arrl.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Saturday, December 16, 2006 12:36 AM
Subject: Re: [ICOM] Standby Switch?


> Gee, guys, I didn't mean to confuse everyone 8^)  I sit here with my
756Pro2
> and Pro3 going and I find something I want to listen to on one of them, so
I
> want to shut off the audio on the other one, quickly, easily, and in a way
> that I can return to the previously set audio level quickly and easily.
> Years ago, rigs almost always had a "STANDBY" switch on the front panel
for
> that (granted, that "STANDBY" switch did more than just shut off the
audio).
> The only way I can figure to do it with these super-duper modern rigs is
to
> use the switch-out in the Phones jack... there should be a better way,
right
> on the front panel, and I was just wondering if I was missing that....
> 73, Jerry K3BZ
>
> ----- Original Message ----- 
> From: "Mike Olbrisch" <mike2004 at elp.rr.com>
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Sent: Friday, December 15, 2006 6:46 PM
> Subject: RE: [ICOM] Standby Switch?
>
>
> >
> >
> >> I'm obviously missing something here (I hate it when I do that....)
> >>
> >>73, Dick
> >
> > No Dick - you don't miss a THING!
> >
> > Mike.
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/