[ICOM] Keying Problem IC-718

[Jimmy Walker]

Thanks for the tip Rune. Is that a factory job, or could I do it if I get 
the part?

Jimmy Walker
WA4ILO
Macon, GA

----- Original Message ----- 
From: "R. Johansen" <patradio at start.no>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Saturday, October 22, 2005 7:44 AM
Subject: Re: [ICOM] Keying Problem IC-718


> Hello
>
> Changed the T/R relay after 2 mnds of use
> Bad quality on the original one
>
> 73 Rune LA8GKA
> ----- Original Message ----- 
> From: "Jimmy Walker" <wa4ilo at cox.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Saturday, October 22, 2005 2:37 PM
> Subject: Re: [ICOM] Keying Problem IC-718
>
>
>> I've tried the dummy load with no success. It seems to be the T/R switch 
>> relay. It works better on simi-breakin but still balks from tome to time. 
>> I fear the problem is a serious hardware issue. Thanks to all for the 
>> suggestions.
>>
>> Jimmy Walker
>> WA4ILO
>> Macon, GA
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>