[ICOM] Keying Problem IC-718

[Anders Janis SM4RNA]

A bad tighten PL-connector on my coax-switch made may IC775 DSP to "hang" on CW. No SWR were detected. Still the problem occored.


/ANders



----- Original Message ----- 
From: "R. Johansen" <patradio at start.no>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Saturday, October 22, 2005 2:44 PM
Subject: Re: [ICOM] Keying Problem IC-718


> Hello
> 
> Changed the T/R relay after 2 mnds of use
> Bad quality on the original one
> 
> 73 Rune LA8GKA
> ----- Original Message ----- 
> From: "Jimmy Walker" <wa4ilo at cox.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Saturday, October 22, 2005 2:37 PM
> Subject: Re: [ICOM] Keying Problem IC-718
> 
> 
> > I've tried the dummy load with no success. It seems to be the T/R switch 
> > relay. It works better on simi-breakin but still balks from tome to time. 
> > I fear the problem is a serious hardware issue. Thanks to all for the 
> > suggestions.
> >
> > Jimmy Walker
> > WA4ILO
> > Macon, GA
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > 
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/