[ICOM] Ic-706IIG HM--103 Microphone

[Clif Holland]

It's not a red wire, look closely, it's a shield with red insulation around 
it....

Clif Holland, KA5IPF
www.avvid.com


----- Original Message ----- 
From: "Oldtimer" <res075cz at gte.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Thursday, March 24, 2005 6:13 PM
Subject: Re: [ICOM] Ic-706IIG HM--103 Microphone


> Thank you, Mac. I just opened up the microphone and found the strangest 
> thing. At the plug end of the microphone cable there is a red wire along 
> with the other wires. But I opened up the microphone and there is no red 
> wire coming out of the cable in to the microphone. Very strange. But I 
> will connect up the other wires. I am just curious why I have a red wire 
> at one end of the cable and none at the other. There is just no place for 
> it to go.
>
> Thanks again to all who answered. I appreciate your help.
>
> 73 de Jim, K5ROV
>
> James (Jim) Parsons, CMSgt, USAF, Ret.
> Ham for over 60 years, 80 % CW, 10 % digital, 10 % SSB
> ARMS, ARRL,  Ex: W1RLA, K5FBB, K4FEO,
> SV0WN (Crete), SV0WN (Rhodes), DL4NC, DL4JP, KA2FC (Japan) ,
> KA2JP (Japan).
> John 3-16
>
>
>
>
> ----- Original Message ----- 
> From: "D C Macdonald" <k2gkk at hotmail.com>
> To: <icom at mailman.qth.net>
> Sent: Thursday, March 24, 2005 5:56 PM
> Subject: Re: [ICOM] Ic-706IIG HM--103 Microphone
>
>
>>I just checked the HM-103 mic that came with the
>> IC-703 I just received from Bill Diamond (WR0T).
>>
>> The color pattern agrees with that sent by Mike (KD9KC).
>>
>> D C (Mac) Macdonald (Capt, USAF-ret)
>> Licensed since 1953
>> ex-DL4AM
>>
>>
>>
>> ----Original Message Follows----
>> From: "Oldtimer" <res075cz at gte.net>
>> Reply-To: ICOM Reflector <icom at mailman.qth.net>
>> To: "ICOM Reflector" <icom at mailman.qth.net>
>> Subject: Re: [ICOM] Ic-706IIG HM--103 Microphone
>> Date: Thu, 24 Mar 2005 17:46:45 -0600
>>
>> Thank you, Mike. The only trouble is that you show five leads including 
>> the shield. I have six leads and one of them is red, which you do not 
>> show. I am confused about that. I do appreciate your help.
>>
>> 73 de Jim, K5ROV
>>
>> James (Jim) Parsons, CMSgt, USAF, Ret.
>> Ham for over 60 years, 80 % CW, 10 % digital, 10 % SSB
>> ARMS, ARRL,  Ex: W1RLA, K5FBB, K4FEO,
>> SV0WN (Crete), SV0WN (Rhodes), DL4NC, DL4JP, KA2FC (Japan) ,
>> KA2JP (Japan).
>> John 3-16
>>
>>
>> ----- Original Message ----- From: "Michael P. Olbrisch" 
>> <mike2004 at elp.rr.com>
>> To: "'ICOM Reflector'" <icom at mailman.qth.net>
>> Sent: Thursday, March 24, 2005 5:25 PM
>> Subject: RE: [ICOM] Ic-706IIG HM--103 Microphone
>>
>>
>>>
>>>
>>>>-----Original Message-----
>>>>From: icom-bounces at mailman.qth.net
>>>>[mailto:icom-bounces at mailman.qth.net] On Behalf Of Oldtimer
>>>>Sent: Thursday, March 24, 2005 11:01 PM
>>>>To: Icom
>>>>Subject: [ICOM] Ic-706IIG HM--103 Microphone
>>>>
>>>>My HM-103 microphone plug for the IC-706IIG had the hasp
>>>>broken off.
>>>
>>>I am holding an HM-103 in my hand.
>>>
>>>Looking at the RJ-45 - locking tab down - pins to the top - cord to the
>>>bottom - pins left to right are:
>>>
>>>1.  Blank (NC)
>>>
>>>2.  Black
>>>
>>>3.  Blank (NC)
>>>
>>>4.  Green
>>>
>>>5.  Shield
>>>
>>>6.  White
>>>
>>>7.  Blue
>>>
>>>8.  Blank (NC)
>>>
>>>Hope this helps.
>>>
>>>Mike.  KD9KC
>>>El Paso, TX.
>>>
>>>
>>>
>>>----
>>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>Icom FAQ: http://www.qsl.net/icom/
>>>
>>
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>>
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/