[ICOM] Ic-706IIG HM--103 Microphone

[Oldtimer]

 Thank you, Mac. I just opened up the microphone and found the strangest 
thing. At the plug end of the microphone cable there is a red wire along 
with the other wires. But I opened up the microphone and there is no red 
wire coming out of the cable in to the microphone. Very strange. But I will 
connect up the other wires. I am just curious why I have a red wire at one 
end of the cable and none at the other. There is just no place for it to go.

Thanks again to all who answered. I appreciate your help.

73 de Jim, K5ROV

James (Jim) Parsons, CMSgt, USAF, Ret.
Ham for over 60 years, 80 % CW, 10 % digital, 10 % SSB
ARMS, ARRL,  Ex: W1RLA, K5FBB, K4FEO,
SV0WN (Crete), SV0WN (Rhodes), DL4NC, DL4JP, KA2FC (Japan) ,
KA2JP (Japan).
John 3-16




----- Original Message ----- 
From: "D C Macdonald" <k2gkk at hotmail.com>
To: <icom at mailman.qth.net>
Sent: Thursday, March 24, 2005 5:56 PM
Subject: Re: [ICOM] Ic-706IIG HM--103 Microphone


>I just checked the HM-103 mic that came with the
> IC-703 I just received from Bill Diamond (WR0T).
>
> The color pattern agrees with that sent by Mike (KD9KC).
>
> D C (Mac) Macdonald (Capt, USAF-ret)
> Licensed since 1953
> ex-DL4AM
>
>
>
> ----Original Message Follows----
> From: "Oldtimer" <res075cz at gte.net>
> Reply-To: ICOM Reflector <icom at mailman.qth.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Subject: Re: [ICOM] Ic-706IIG HM--103 Microphone
> Date: Thu, 24 Mar 2005 17:46:45 -0600
>
> Thank you, Mike. The only trouble is that you show five leads including 
> the shield. I have six leads and one of them is red, which you do not 
> show. I am confused about that. I do appreciate your help.
>
> 73 de Jim, K5ROV
>
> James (Jim) Parsons, CMSgt, USAF, Ret.
> Ham for over 60 years, 80 % CW, 10 % digital, 10 % SSB
> ARMS, ARRL,  Ex: W1RLA, K5FBB, K4FEO,
> SV0WN (Crete), SV0WN (Rhodes), DL4NC, DL4JP, KA2FC (Japan) ,
> KA2JP (Japan).
> John 3-16
>
>
> ----- Original Message ----- From: "Michael P. Olbrisch" 
> <mike2004 at elp.rr.com>
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Sent: Thursday, March 24, 2005 5:25 PM
> Subject: RE: [ICOM] Ic-706IIG HM--103 Microphone
>
>
>>
>>
>>>-----Original Message-----
>>>From: icom-bounces at mailman.qth.net
>>>[mailto:icom-bounces at mailman.qth.net] On Behalf Of Oldtimer
>>>Sent: Thursday, March 24, 2005 11:01 PM
>>>To: Icom
>>>Subject: [ICOM] Ic-706IIG HM--103 Microphone
>>>
>>>My HM-103 microphone plug for the IC-706IIG had the hasp
>>>broken off.
>>
>>I am holding an HM-103 in my hand.
>>
>>Looking at the RJ-45 - locking tab down - pins to the top - cord to the
>>bottom - pins left to right are:
>>
>>1.  Blank (NC)
>>
>>2.  Black
>>
>>3.  Blank (NC)
>>
>>4.  Green
>>
>>5.  Shield
>>
>>6.  White
>>
>>7.  Blue
>>
>>8.  Blank (NC)
>>
>>Hope this helps.
>>
>>Mike.  KD9KC
>>El Paso, TX.
>>
>>
>>
>>----
>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>Icom FAQ: http://www.qsl.net/icom/
>>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>