[ICOM] Clarification on Icom 2410 problem RECEIVE Audio

[James E Good]

One other possibility:  Is the VOX control turned off or could the 
VOX/Anti-VOX be contributing to the problem?

Just thoughts.
Jim  KD5VXH

----- Original Message ----- 
From: "Dick Flanagan" <dick at twohams.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Sunday, January 09, 2005 4:45 PM
Subject: Re: [ICOM] Clarification on Icom 2410 problem RECEIVE Audio


> At 02:30 PM 1/9/2005, you wrote:
> >I have 2 of these that have recieve audio problems.
>
> Are you familiar with how these radios operate; i.e., are they new to you? 
> Have they worked properly before?  Could PL-receive be set?  Could the 
> squelch be set too high?  Is the problem the same on both VHF and UHF? 
> Does the intermittent transmitter misbehave without a mic connected?  Try 
> swapping mics and see if any of the problems follow the mics.  Have you 
> tried a CPU reset?
>
> I've got four of these radios and I have never seen this problem (knock on 
> wood).
>
> 73, Dick
> --
> Dick Flanagan K7VC NV SM
> E-mail: k7vc at arrl.org
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Win a new Icom IC-756 PRO III and help QSL/QTH.net
> Details at: http://mailman.qth.net/
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.298 / Virus Database: 265.6.9 - Release Date: 1/6/2005
>
> 



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.298 / Virus Database: 265.6.9 - Release Date: 1/6/2005