[ICOM] IC761 on PSK

[Paul Gates, KD3JF]

I have had a heck of a time getting the sound cards right. Never could get the Rascal to work on the laptop. I did get the Signal Link to work on the desktop but now the desktop has a corrupted file and the harddrive needs to be replaced I think.
   
  Back to the laptop.... I think I found the problem.. The mike input on the laptop does not work. How I discovered this was I was trying to get on Echolink and could not get the Mic to work. I have tried several mic's but no success. I have checked the sound card settings too! Always something! Receive works good on Echolink but can't transmit. When I responded a few minutes ago I mistyped my rig is the 706 not the 761!

Jerry bishop <gsbishop at charter.net> wrote:
  Hi- Had about the same thing with my TS-940.Was trying to use a home built 
cable and couldn't get it to work correctly.I fed the mic jack,which is 
ok,but very sensitive.Later got the correct cable and was able to run from 
the ACC jack. I now have Icom'sand all run well with Rascal from the Acc 
jack. Play with yr gain controls for the sound card .Get back if you need 
more --de Jerry W8KQ
----- Original Message ----- 
From: "Leanne" 
To: "ICOM Reflector" 
Sent: Tuesday, December 06, 2005 9:32 PM
Subject: Re: [ICOM] IC761 on PSK


> On any of my Icom radios, I have never used the accessory jack.
> I have always made up a cable to go to the front microphone
> connector through a home brew switchbox.
>
> Leanne - W1WXS
> .net/icom/ 
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
  



Paul Gates, KD3JF
K1 #0231
KX1 #1186
XG1