[ICOM] ICOM IC765 AND N3FJP SOFTWARE

[Graham Shortreed]

You may have hit the nail on the head Jim.
I'll set the program up with the 2C setting and see what happens.
The program by the way is the CQWW program.
I tried the demo version and was truly impressed with the simplicity of it. 
I've got WRITELOG and CT, both which can be a pain in the --- or cumbersome.
I'll give the setting a go tomorrow morning and let the group know what the 
outcome is.
Many thanks for your help.

de..Graham...VE7ABC
----- Original Message ----- 
From: "Jay Bareman" <Radio_Q at mchsi.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Cc: <snkdavis at aol.com>
Sent: Thursday, October 14, 2004 1:30 PM
Subject: Re: [ICOM] ICOM IC765 AND N3FJP SOFTWARE


>I replied earlier to this message asking which program he was having 
>trouble
> with.  I subsequently got a private e-mail from another party who 
> indicated
> he had tried three of the programs and when they did not work, he sent it
> back.  I decided I would respond immediately rather than waiting for 
> Graham
> to reply.  I am really happy with the programs and am sure the problems 
> are
> not with the program.
>
> I used the N3FJP Field Day program this summer, and most recently used his
> CQP program.  they work great on both my Icom ProII and the old Icom 
> IC-765.
>
> Specifically for the IC-765, it is important to note the CIV interface
> default baud rate is 1200 for the IC-765 but I have changed the dip 
> switches
> and use the rig at 9600 baud.  I use 19.2 KB on the PII  Both speeds are
> well supported.
>
> It is also important to note there is a place on the setup screen where 
> you
> enter the HEX address of your rig in lieu of the '56' Scott has in the
> program.  You must put in the IC-765 value of 2C which is the Hex
> representation.  Do not use the  44 they mention in the manual as it is 
> the
> decimal equivalent.   I hope this helps.
>
> Jim   K5QQ
>
> ----- Original Message -----
> From: "Graham Shortreed" <gshortre at telus.net>
>
> I would like to know if anyone on this reflector is using the N3FJP 
> software
> with the IC765.  I'm having a problem with the software recognizing the 
> 765.
> I contacted Scott, and he hasn't the answer.  Can anyone help?
> 73..de..Graham
>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>