[ICOM] question abt ICOM

[Jim Miller]

Easy things first... watch the swr meter and see that you don't have a loose
connection.  OR tighten up all your connections and see if it goes away.
Guess I'm one to eliminate the most probable and easy before I get into
overanalyzing a problem.

73, de Jim KG0KP

----- Original Message ----- 
From: <WORKSNTV at aol.com>
To: <paham at mailman.qth.net>; <icom at mailman.qth.net>;
<amateurradioetc at groups.aol.com>; <10m at mailman.qth.net>;
<HamRadioHelpGroup at yahoogroups.com>; <k3ytl at yahoogroups.com>
Sent: Monday, May 31, 2004 10:47 AM
Subject: [ICOM] question abt ICOM


> Hello:
>
>
> I have an Icom 706 mg2 and it's developed a problem that comes and
goes....I
> will be transmitting on SSB----on 10 meters--with a good swr---all of a
sudden
> the power goes from 100 watts ssb to about 25. If I unkey and then try
> again---power is back to normal.
> Anyone else experience this problem?
>
> Thanks in advance,
>
> 73'
>
> Bob
> WB3DYE
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/