[Icom] 3210

[Loren James]

bottom open,front toward me 5th from the left on j-10?

----- Original Message ----- 
From: "Gary Fiber" <g.fiber@verizon.net>
To: <icom@mailman.qth.net>
Sent: Friday, May 07, 2004 7:22 PM
Subject: Re: [Icom] 3210


> Usually a Pin of the 2nd IF IC.
>
> I found a schematic of the IC-3210 online. Look at J-10 Pin 5 the SQLS
pin.
> That pin will change state when a signal opens the squelch.
> I am not sure what voltage level it will be, you can measure that and also
> might have to build a an inverter or have it fire a transistor switch to
> get the voltage you require but it will work for your COS requirement.
>
> Gary K8IZ
>
> >got a small query, I have a 3210 that I want to use as a remote
> >receiver/transmitter on a repeater. Anyone know where there may be a good
> >spot to pull COS from?
> >Many thanks. N2LSJ
>
> Gary Fiber K8IZ
> GROL PG-19-6691
> Washington State Resident
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner@mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>