[Icom] 756PRO2 no transmit

[NA4FM (Buck)]

See George's answer. 

Also, do a search for the rig on GOOGLE and on QRZ.  There is a lot of
talk about that same problem.  There is a mod that helps prevent that
problem, but I am not sure it has actually been solved by Icom yet.  I
was planning on getting a 746Pro II, but with that problem being so
apparently common, I decided to get the 706 first.  Later, if the
problems go away, I'll reconsider purchasing a 746 Pro II.

Buck

> -----Original Message-----
> From: Dan [mailto:w0vd@sofnet.com] 
> Sent: Saturday, March 27, 2004 11:56 PM
> To: icom@mailman.qth.net
> Subject: [Icom] 756PRO2 no transmit
> 
> 
> Hello All
> I saw on this list a few days ago of a 756pro2 that did not 
> have any transmit. Mine went dead today. Was using the radio 
> and all was fine, steped away from the shack for about 10 
> minutes and came back and radio was dead on transmit. All 
> fuses are OK. I can hear it in another rig but at a very low 
> level. If I send it back to Icom is there any factory updates 
> or upgrades that can be done? serial number 01156
> 
> Thanks
> Dan W0VD
> grid: EM27ud
> w0vd@arrl.net
> www.clevengercreations.com/w0vd.htm
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, 
> icom-owner@mailman.qth.net Icom Users Net: Sundays, 1700Z, 
> 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
> 
> 
>