[ICOM] Re: 718 at half power

[awallacejr at sbcglobal.net]

You didn't follow my earlier messages. the power is set at "Hi'. And yes I
do have a manual and yes I have read it re power settings.

Andy K5VM

----- Original Message ----- 
From: "Frank N. Haas" <kb4t at arrl.net>
To: <icom at mailman.qth.net>
Sent: Monday, December 06, 2004 7:00 AM
Subject: [ICOM] Re: 718 at half power


>
> I agree with Dave WD9BDZ that it may be necessary to insure that the power
> output setting of the 718 is indeed correct.
>
> Page 42 of the manual describes how the RF power output of the radio is
> adjusted.
>
> You must enter the Quick Set Mode and choose the first option RF Power. It
> can be set from L through 99 to H or about 100 watts output.
>
> The default value is H or 100 watts but there is no telling what the
> setting might be right now. Check this to see the current setting. Perhaps
> that is all that's wrong.
>
> Good luck!
>
> Frank N. Haas KB4T
> Florida
> New 718 Owner
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Win a new Icom IC-756PROIII and help QSL/QTH.net
> Details at: http://mailman.qth.net/
>