[ICOM] Serial command for the IC-746 and IC-746PRO attenuator

[MikeR]

Carl -
If you download ICCommand from DF4OR's site, you can easily plug in values
and see the results. Assuming of course you have access to the radios. ....
73, Mike NF4L
----- Original Message ----- 
From: "Carl Moreschi" <n4py at earthlink.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Sunday, August 22, 2004 5:04 PM
Subject: [ICOM] Serial command for the IC-746 and IC-746PRO attenuator


> The documentation for the 746 and 746PRO attenuator command is not very
> clear.  The 746PRO says send 0x11 0x01  to turn on the attenuator.  The
746
> says send 0x11 0x20 to turn on the attenuator.  Are these the correct
> values?  I am suspicious the the doc is wrong for the 746PRO.  Does anyone
> know for sure what these command values should be?
>
> Carl Moreschi N4PY
> Franklinton, NC
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>