[Icom] CIV Control of Icom VHF and UHF rigs

[Jens Schmidt]

Hi Ken,

when I type IC-2100H into Google, the first two items
relate to that radio.
Try here: http://www.icomamerica.com/support/manuals/ic-2100h.pdf
That's the whole manual, and I did not find anything about CIV.
I get the idea that it is only appliccable to radios designed for base
station use.

Good luck
73 Jens    ZL2TJT

Ken Brown wrote:

> Hi All,
>
> I need to set up some UHF and VHF radios for Skywarn use in an
> operations center that is 500 cable feet from the antenna location.
> Running heliax is not an option and remote control of radios placed
> in the equipment shelter near the antennas seems the best way to go.
> I know many of the current rigs support a cpu interface that lets
> them be cloned from each other and I wonder if this is a CIV
> interface that could be used for rig control, mainly frequency,
> tone, offset, and power.  If so is there any freely available
> software that would demonstrate this function on a IC-2100H.  I
> know this would work with a 706 but the price of that may be a bit
> steep.
>
> Ken Brown, n5kuk
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner@mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/