[Icom] CIV Control of Icom VHF and UHF rigs
R Ryan
[email protected]
Sat, 10 Apr 2004 12:24:52 -0500
Ken,
The manual for the IC-2100H shows that the rig can have IR control from an
HM-90 microphone when using an EX-1759 IR receiver. You could drive some
type of IR emitter remotely to simulate the HM-90.
Roger
----- Original Message -----
From: "Ken Brown" <[email protected]>
To: <[email protected]>
Sent: Friday, April 09, 2004 8:51 AM
Subject: [Icom] CIV Control of Icom VHF and UHF rigs
>
> Hi All,
>
> I need to set up some UHF and VHF radios for Skywarn use in an
> operations center that is 500 cable feet from the antenna location.
> Running heliax is not an option and remote control of radios placed
> in the equipment shelter near the antennas seems the best way to go.
> I know many of the current rigs support a cpu interface that lets
> them be cloned from each other and I wonder if this is a CIV
> interface that could be used for rig control, mainly frequency,
> tone, offset, and power. If so is there any freely available
> software that would demonstrate this function on a IC-2100H. I
> know this would work with a 706 but the price of that may be a bit
> steep.
>
> Ken Brown, n5kuk
> ----
> Your Moderator: Dick Flanagan K7VC, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>