[Icom] 756Pro...PW-1 help...tnx!

Sat, 7 Sep 2002 11:05:19 -0500

Steve, it is relatively easy if you have the manuals which I assume you do
not.  But, believe me it will do it and works like a charm. I would scan the
appropriate manual pages but f or the fact my scanner is not currently
installed while I am working on the computer.  If no one else responds, let
me know and I will at least email some instructions.  It is basically a
matter of accomplishing the physical connections properly, then setting the
amp and radio so can communicate with each other.  Bill, K3YC
----- Original Message -----
From: "Steve Narducci" <[email protected]>
To: <[email protected]>
Sent: Friday, September 06, 2002 11:39 PM
Subject: [Icom] 756Pro...PW-1 help...tnx!

| Just put both of these in the shack.  I don't know how to make the PW-1
auto band change with the rig.  I have the OPC-104B plugged into the ACC2 on
the rear of the 756 to the ACC1 on the PW-1 (have the exciter switched to 1
rig) and also have the remote cable also in the correct holes according the
manuals.  The amp works fine as long as I manually change bands.
|
| One more thing....is there a website showing how to mod this for 10/12
meters?  Thanks guys....Steve...W9SN
|
|
| --
| __________________________________________________________
| Sign-up for your own FREE Personalized E-mail at Mail.com
| http://www.mail.com/?sr=signup
|
| ----
| Your Moderator: Dick Flanagan W6OLD, [email protected]
| Icom FAQ: http://www.qsl.net/icom/