[Icom] 756Pro...PW-1 help...tnx!

Sat, 07 Sep 2002 01:10:13 -0700

Hi Steve,

To answer your questions:

1. There is a procedure on page 12 of the PW-1 user manual for setting up
the PW-1 to poll the CI-V port on the exciter.  The CI-V  "Transceive"
parameter in the "Set/Other" menu of the IC-756 must be "On". You can also
try initially setting the CI-V baud rate on the Pro to 9600 instead of
"Auto".

For the 10/12m information, go to: http://www.qsl.net/icom/manuals.html and
click on "Download IC-PW1 Documents".

Best 73,
Adam, VA7OJ/AB4OJ
North Vancouver, BC, Canada
http://www.qsl.net/ab4oj/
Note new e-mail address:
mailto:[email protected]

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Steve Narducci
Sent: Friday, September 06, 2002 21:39
To: [email protected]
Subject: [Icom] 756Pro...PW-1 help...tnx!

Just put both of these in the shack.  I don't know how to make the PW-1 auto
band change with the rig.  I have the OPC-104B plugged into the ACC2 on the
rear of the 756 to the ACC1 on the PW-1 (have the exciter switched to 1 rig)
and also have the remote cable also in the correct holes according the
manuals.  The amp works fine as long as I manually change bands.

One more thing....is there a website showing how to mod this for 10/12
meters?  Thanks guys....Steve...W9SN