[Icom] PW-1, 756pro, 738 problems....

Wed, 23 Oct 2002 18:57:22 -0400

Steve,

Did you adjust the ALC on the PW1 to accommodate the 738?  If not, give 
that a try.

Harry

----- Original Message -----
From: Steve Narducci <[email protected]>
Date: Wednesday, October 23, 2002 6:36 pm
Subject: [Icom] PW-1, 756pro, 738 problems....

> I have had my pw-1 married to my pro for several months and just 
> got my new opc cable to hook up the 738.  I did a complete 
> reseting of the pw-1 and did the 2 rig setting as shown in the 
> manual.  My pro works fine with the amp and all is well, the 738 
> appeared to be fine and it is now married to the amp and follows 
> bands tunes and all. However when i activate the amp, my power is 
> low and delayed with the 738.  Watching the output of the 738 is 
> only 10 watts, and there is a delay of the power going into the 
> pw1 (if I let it set for 2 seconds, there is no delay).  When I 
> turn the amp off, no problems, full 100 watts out.  
> Both rigs are set to 9600 baud, the civ address is set to 54h on 
> the 738.  Am I doing something wrong?  Thank you...Steve
> -- 
> __________________________________________________________
> Sign-up for your own FREE Personalized E-mail at Mail.com
> http://www.mail.com/?sr=signup
> 
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 