[Icom] PW-1, 756pro, 738 problems....

Wed, 23 Oct 2002 15:43:27 -0700

It almost sounds like the PW-1 is throttling back the 738 with the ALC.

73 - Larry W=D8NFU

At 05:36 PM 10/23/2002 -0500, you wrote:
>I have had my pw-1 married to my pro for several months and just got my=20
>new opc cable to hook up the 738.  I did a complete reseting of the pw-1=20
>and did the 2 rig setting as shown in the manual.  My pro works fine with=
=20
>the amp and all is well, the 738 appeared to be fine and it is now married=
=20
>to the amp and follows bands tunes and all. However when i activate the=20
>amp, my power is low and delayed with the 738.  Watching the output of the=
=20
>738 is only 10 watts, and there is a delay of the power going into the pw1=
=20
>(if I let it set for 2 seconds, there is no delay).  When I turn the amp=20
>off, no problems, full 100 watts out.
>Both rigs are set to 9600 baud, the civ address is set to 54h on the=20
>738.  Am I doing something wrong?  Thank you...Steve
>--
>__________________________________________________________
>Sign-up for your own FREE Personalized E-mail at Mail.com
>http://www.mail.com/?sr=3Dsignup
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/