[Icom] Mobile console for 2 ICOM radio
Chris BONDE
[email protected]
Sat, 16 Mar 2002 23:10:36 -0800
Is there a special Plexi?
What do you use to heat it, very hot water?
TANX Chris opr VE7HCB
At 10:33 PM 2002-03-16 -0600, you wrote:
>What you might try is to purchase Plexiglas or Lexan sheeting and mold a
>mount that will fit over the console and or hump. That is what I did for
>mounting a couple of my radios. Then I used Velcro to mount the radio to
>the Plexi. That way I can take it all apart to periodically clean everything
>as dirt and dust need to be removed.
>
>The plexi can be easily cut and heated to bend in almost any shape.
>
>Hope that this helps.
>
>73 de Scott
>KD5FBA
>
>----- Original Message -----
>From: "Gary Pearce KN4AQ" <[email protected]>
>To: <[email protected]>
>Cc: <[email protected]>
>Sent: Friday, March 15, 2002 10:36 PM
>Subject: Re: [Icom] Mobile console for 2 ICOM radio
>
>
> > At 07:31 PM 3/15/02 -0500, [email protected] wrote:
> > >Hello to All,
> > >
> > >...Now I'm looking for a way to mount the radios in front of the seat
>over
> > >the center floor hump similiar to the W9IIX mounts but want to mount the
> > >laptop over that. Something similiar to how most police cars mount their
> > >terminals. I have checked Galls Inc. and W9IIX. I am sure there are
> > >other companies that make something like this.
> > > Ron, N4GFO
> >
> >
> > Here'a link to one company that supplies such mounting equipment:
> >
> > http://www.gamberjohnson.com/
> >
> > I have three radios mounted on the hump of a Park Avenue with one of their
> > FloorMaster mounts. It's super heavy-duty, pretty low-tech and allows
> > moderate flexibility of mounting configurations. Figuring out what parts
> > to get was the hard part. A local dealer helped me pick the right
> > pieces. Cost about $110.
> >
> > 73,
> > Gary KN4AQ
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom FAQ: http://www.qsl.net/icom/