[Icom] Mobile console for 2 ICOM radio

Sat, 16 Mar 2002 22:33:16 -0600

What you might try is to purchase Plexiglas or Lexan sheeting and mold a
mount that will fit over the console and or hump. That is what I did for
mounting a couple of my radios.  Then I used Velcro to mount the radio to
the Plexi. That way I can take it all apart to periodically clean everything
as dirt and dust need to be removed.

The plexi can be easily cut and heated to bend in almost any shape.

Hope that this helps.

73 de Scott
KD5FBA

----- Original Message -----
From: "Gary Pearce KN4AQ" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: Friday, March 15, 2002 10:36 PM
Subject: Re: [Icom] Mobile console for 2 ICOM radio

> At 07:31 PM 3/15/02 -0500, [email protected] wrote:
> >Hello to All,
> >
> >...Now I'm looking for a way to mount the radios in front of the seat
over
> >the center floor hump similiar to the W9IIX mounts but want to mount the
> >laptop over that.  Something similiar to how most police cars mount their
> >terminals.  I have checked Galls Inc. and W9IIX.  I am sure there are
> >other companies that make something like this.
> >                      Ron, N4GFO
>
>
> Here'a link to one company that supplies such mounting equipment:
>
> http://www.gamberjohnson.com/
>
> I have three radios mounted on the hump of a Park Avenue with one of their
> FloorMaster mounts.  It's super heavy-duty, pretty low-tech and allows
> moderate flexibility of mounting configurations.  Figuring out what parts
> to get was the hard part.  A local dealer helped me pick the right
> pieces.  Cost about $110.
>
> 73,
> Gary KN4AQ
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>