[Icom] PW-1

Thu, 21 Feb 2002 23:18:05 -0500

I believe those are the replacement feets for the remote, should one
become misplaced. Sure do love my PW-1
73, Warren W1GUD

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Julio
Sent: Thursday, February 21, 2002 9:22 AM
To: [email protected]
Subject: Re: [Icom] PW-1

On my remote the disks and strip you mention are felt material and they
are in place as you mention. The rubber feet were in a plastic bag with
a couple of screws and a ground lug.

Julio
----- Original Message -----
From: "WA9ALS - John" <[email protected]>
To: <[email protected]>
Sent: Thursday, February 21, 2002 7:56 AM
Subject: RE: [Icom] PW-1

> > There are 2 rubber disks that are included with the PW1. The 
> > instruction manual lists them as feet for the remote.
> >
> > Anybody figure out where they are supposed to install? The only 
> > place I could figure to put them was in the slotted area of the 
> > bottom case screws.
>
> My remote has 4 round rubber disks and a rubber strip that runs all 
> along the front edge.  The round rubber disks are NOT over the slotted

> area.  The round disks were already there - I didn't install them.
>
> ? Maybe 2 of your 4 fell off and were thus found in the package?
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected] List 
> Archives : http://mailman.qth.net/pipermail/icom/
> List Control  : http://mailman.qth.net/mailman/listinfo/icom/
>

----
Your Moderator: Dick Flanagan W6OLD, [email protected] List
Archives : http://mailman.qth.net/pipermail/icom/
List Control  : http://mailman.qth.net/mailman/listinfo/icom/