[Heathkit] OT - Specs On AL-82

[Carl]

Does Jose agree?

Carl
KM1H


----- Original Message ----- 
From: "Peter Markavage" <manualman at juno.com>
To: <dfischer at usol.com>
Cc: <heathkit at mailman.qth.net>
Sent: Tuesday, July 08, 2008 5:46 PM
Subject: Re: [Heathkit] OT - Specs On AL-82


> Manuel says:
> 
> Full ratings, 1500 watts, when driven by 100 watt exciter
> CW for 1500 watts output, final grid current should be around 250 MA and
> plate current should be less then 900 MA.
> For SSB: tune up in CW; then adjust exciter gain control to permit voice
> peaks to reach the same value the peak output meter read in CW when fully
> loaded. The plate and grid currents should remain well below 50% of the
> CW values during normal operation.
> 
> This is what Manuel says.
> 
> Pete
> 
> On Tue, 8 Jul 2008 17:34:06 -0400 "Duane Fischer, W8DBF"
> <dfischer at usol.com> writes:
>> 
>> 
>> Hi All,
>> 
>> Sorry to post this here, but I can not get any answers anywhere. If 
>> you have 
>> a manual for an Ameritron AL-82, I need to know the suggested grid 
>> MA and 
>> the plate MA. Thanks.
>> 
>> Duane Fischer, W8DBF - WPE8CXO
>> E-Mail: dfischer at usol.com
>> Hallicrafters web site: www.w9wze.net
>> HHRP web site: hhrp.w9wze.net
>> 
>> 
>> 
>