[Heathkit] HR-10B

[ma.locksmith at juno.com]

You should have no problem finding a "universal" power transformer that
should work.  The schematic gives you the voltages, and you should be
able to determine the current required.  For the filaments (6.3 volts AC)
just add up the currents for all of the tubes, and lamps, and external
load.  The input to the rectifier is shown as 410 volts center-tapped. 
You can determine the current needed "estimated" from the capability of
the rectifier (6X4).

I think Antique www.tubesandmore.com has something that will work.

Ed
K1ZOK

On Fri, 1 Apr 2005 10:40:20 -0500 "Danny Allen" <harleyec at bellsouth.net>
writes:
>   I am in the process of trying to rebuild an HR-10B receiver.The 
> receiver is missing the power transformer (54-122-24).So far I have 
> tried RF Parts and Peter Dahl , but neither have a crossover .Can 
> anyone offer any advise ?
> 
>   Thanks Danny AG4PR
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF        
> ** For Assistance: dfischer at usol.com **         
> $$ See the vintage area on the HCI web site - http://www.w9wze.org 
> $$ 
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit
> 
>