[HBR] HBR 16 Underside Layout?

[bignick at execpc.com]

Niel,

Just an FYI .. and you probably know this already. 
But, in many of may radios
that I had home-brewed, I took elaborate
pains to route the cloth covered wiring nice and neat
and at
right angles, etc.

I think I recall Ted Crosby strongly
advising against any impulse to do so.  Direct
wiring, although
very ugly, offers the best performance as I understand it.  So, I
would try to "neaten-up" too much :-)

What I did to
place componets was to examine some photo's of previously built
units
and compromised on where components (such as chokes) would fit.

ex:  I think my rectifiers are pretty well hidden under filter caps
and atleast one choke is
mounted on a side-wall.

73

--KC9KEP

> I have an HBR-16 project waiting for my
attention. Unfortunately a 
> non-house trained rodent took up
house keeping at some point. Now I need 
> to replace several
ruined tube sockets in the IF strip. In the process 
> I'd like to
neaten up the wiring. 
> 
> See
http://www.prismnet.com/~nielw/hbr16/photos/DSCF0021a.html Does 
>
anyone have good photos or a layout showing recommended underside 
> component placement? 
> 
> tnx es 73, 
>
Niel - W0VLZ 
>
______________________________________________________________ 
>
HBR mailing list 
> Home:
http://mailman.qth.net/mailman/listinfo/hbr 
> Help:
http://mailman.qth.net/mmfaq.htm 
> Post:
mailto:HBR at mailman.qth.net 
> 
> This list hosted by:
http://www.qsl.net 
> Please help support this email list:
http://www.qsl.net/donate.html 
>