[Hammarlund] SP-600 Parts Needed

[Joe Connor]

Guys:
 
    I'm looking for a few parts for an SP-600, JX-14:
 
    1. The can that covers T-9, the 3.5 mhz oscillator; and
 
    2. The bottom plate for the turret assembly.
 
    Might you have either of these? As always, thanks for your help.
 
    By the way, I resolved the tuning issue that I aspect you about last week. There was a tiny speck of gunk on the roller wheel. I could barely see it with a magnifying glass. I scraped it off with a small-bladed screwdriver and the set tunes very smoothly. The finishing nail I saw in one of the gears was a makeshift dial stop. 
 
    The set now receives on all six bands. I replaced the filter caps and am now in the process of restuffing the 10 mfd bathtub caps. The AVC isn't working but that's probably not surprising since the set still contains all the Black Beauties.
 
    
                                     Joe Connor